Preparation:
Wash the car thoroughly and remove any iron or other build-up using our product #SIDERO.
Step 1:
Shake bottle well. Treat wet or dry paintwork, covering a maximum area of half a metre at a time.
Step 2:
On a dry car. Spray it or dispensing it on a short-hair microfiber cloth and then spread it over the area to be treated, then make a finishing pass with a clean, dry, long-hair microfiber cloth.
The second option is to spray it directly on the bodywork and spread it with a short-hair microfiber cloth, without pressing too hard, finishing by drying with a clean and dry, long-hair microfiber cloth.
Step 2:
On a wet car. Spray directly on the paintwork and spread with a “SUPER DRYER” microfiber cloth. Two or three sprays per area are enough. Use no more than two sprays on small areas.
Step 3:
Polishing. Use a clean, high-quality microfiber cloth and polish to a high-mirror finish before moving to the next area of the paintwork. Use more than one cloth if necessary. A second layer can be applied, but you must wait 24 hours. Full product curing takes 12 hours.
WARNINGS
Do not use in direct sunlight or on warm paintwork. For best results, do not apply with temperatures above 25°C. The product can be used on wet surfaces, but for best results it should be applied on a dry surface.
